 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Frequency Translation Products FX-200 Description: The FX-200 is a dual output frequency translator which is used to translate one of two different input frequencies greater than 1 MHz to one of two different output frequencies between 77.76 MHz and 777.6 MHz. All the major FEC rates are supported such as 15/14ths and 255/237. This unit can also support switching from 10.0 G to 10.3125 G, or even OC-n to 10 GigE. Applications: * SONET/SDH * DWDM * FEC (Forward Error Correction) Typical Application A) 155.52 MHz Input Frequency Q FX-200 Lock Detect VCXO Monitor Disable 1) 622.08 MHz Q Q Q Frequency Divider Phase Freq Detector Loop Filter Input Select Frequency Divider Microprocessor ARY N ELIMI PR Input Signal Output Select B) 166.6286 MHz 3 BLE Q VAILA A 2) 666.5143 MHz PECL VCSO 2 PECL VCSO 1 Output Signal Input Select! 0 0 1 1 Output Select! 0 1 0 1 Description of Action! A to 1 :Translates 155.5200 MHz to 622.0800 MHz A to 2 :Translates 155.5200 MHz to 666.5143 MHz! B to 1 :Translates 166.6286 MHz to 622.08 MHz! B to 2 :Translates 166.6286 MHz to 666.5143 MHz! All components outside the dotted line box are user supplied components. This is just one possible configuration of the FX-200. For additional information about your specific needs, please contact our factory. Performance Characteristics Parameter Output Frequencies Supply Voltage, Supply Current Input Signal, OUTPUT, C = 5.0 Vdc D = 3.3 Vdc 5.0 Vdc 3.3 Vdc Comp PECL F = Comp PECL Symbol Vcc Vcc Icc Icc CLKIN --VOH VOL VOH VOL tR/tF Sym Min. 77.76 4.75 3.15 Typical 5.00 3.30 80 75 PECL Max 777.6 5.25 3.45 125 120 --Vcc-0.880 Vcc-1.620 Vcc-0.880 Vcc-1.555 Unit MHz Vdc Vdc mA mA ----V V V V ps % ps ps dB ppm --Vcc-1.025 Vcc-1.810 Vcc-1.085 Vcc-1.830 PECL VOH (Temp Range C = 0C to +70C) VOL (Temp Range C = 0C to +70C) VOH (Temp Range F = -40C to +85C) VOL (Temp Range F = -40C to +85C) Rise/Fall Time (20% to 80% @ 622.08 MHz) 250 45 49/51 0.23 3 400 55 1 5 0.1 Output Symmetry (Duty Cycle) Jitter Generation, rms (12kHz to 20 MHz) Jitter Generation, rms (cycle to cycle method) Jitter Transfer, GR-253-CORE sec 5.6.2.1.2 Input Frequency Tracking Capability (Can translate Stratum 1,2,3,3E,4 or SONET Min. source) APR 40 Temp Range C = 0C to +70C Temp Range F = -40C to +85C Operating Temperature Package Size 30.48 x 25.4 x 6.35 mm (1.2" x 1.0 x 0.25") Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * Web: www.vectron.com 88 Frequency Translation Products FX-200 Outline Drawing Pin Out Information Pin 1 2 3 4 5 6 7 8 9 10 Symbol In CIn --------In Sel Out Sel Vcc LD (output) Monitor (output) Out GND COut GND Disable (input) Function Input Frequency Complementary Input Frequency (Q) Missing Missing Missing Missing Input Select - "0" = A, "1" = B Output Select - "0" = 1, "1" = 2 Supply Voltage Lock Detect Logic "1" indicates a locked condition Logic "0" indicates that no input signal is presented PLL / VCSO control Voltage. Under locked conditions, should be >0.3V and <3.0V for the 3.3 volt option or >0.5V and <4.5V for the 5 volt option. Input frequency may be out of range if voltage exceeds these limits. Output Signal - Q Ground Complementary Output Signal - Q Ground Disables Output Floating and logic "0" = Output Enabled Logic "1" = Output Disabled FX 11 12 13 14 15 16 Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * Web: www.vectron.com 89 Frequency Translation Products FX-200 Recommended Pad Layout Recommended Reflow Profile Temperature ( C) pre-heating! 60 to 90 sec.! @ 140C to 160C reflow! 40 to 60 sec.! @ >183C Output Load Configuration VCC *Note: VI highly recommends either a linear regulator or bypass capacitors; 10 uF, 0.1 uF and a 100pF capacitor would be typical. * (9) FX-200 Input Frequency Q Q Frequency Divider Phase Freq Detector Loop Filter * * 50 ohms 50 ohms Lock Detect VCXO Monitor Disable PECL VCSO 1 Q Q (14) (12) (Fout) All components outside the dotted line box are user supplied components and/or connections. This is just one possible configuration of the FX-200. For additional information about your specific needs please contact our Factory. Input Select Microprocessor Frequency Divider PECL VCSO 2 Output Select (13,15) Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * Web: www.vectron.com 90 Frequency Translation Products FX-200 Standard Frequencies 1.024 MHz 1.544 MHz 2.048 MHz 4.096 MHz 6.480 MHz 8.192 MHz 10.000 MHz 12.800 MHz 13.000 MHz 15.000 MHz 16.384 MHz 19.440 MHz 20.0000 MHz 20.1416 MHz B2 B3 B4 B5 C2 C3 C4 D2 D3 D4 D5 D6 E2 E3 20.4800 22.2171 26.0000 27.0000 29.4912 32.7680 37.0560 38.8800 44.4343 44.7360 51.8400 61.4400 65.5360 77.7600 MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz E4 E5 F3 F4 F5 H3 H4 H5 J2 J3 J4 J5 J6 K2 78.1250 MHz 78.6432 MHz 82.9440 MHz 112.000 MHz 114.000 MHz 125.000 MHz 139.264 MHz 155.520 MHz 156.250 MHz 161.1328 MHz 166.6286 MHz 167.3316 MHz 168.0407 MHz 622.0800 MHz K3 K5 K6 L2 L3 L4 L5 M2 M3 M4 M5 N2 N3 P2 624.7048 MHz 625.0000 MHz 627.3296 MHz 644.5312 MHz 666.5143 MHz 669.1281 MHz 669.3266 MHz 690.5692 MHz 710.9486 MHz 719.7344 MHz 777.6000 MHz No Second Input Freq Input Freq not listed Output Freq not listed P6 P3 P7 P4 P5 R2 R3 R4 T2 T3 T4 XX SS SS Ordering Information FX FX 200 D F C M2 M5 P2 P5 Output Frequency - 2 (K3 to T4) See Frequency Chart Above *Consult factory for availability of non-standard output frequencies. ** Output Frequency 2 must be greater than Output Frequency 1. Product Family FX-Frequency Translator Package Package 200 = 16 lead SMD Supply Voltage C = 5.0 Vdc 5% D = 3.3 Vdc 5% Output F = Comp. PECL Temperature Range C = 0oC to +70oC F = -40oC to +85oC Input Frequency - A (B2 to R4) See Frequency Chart Above Output Frequency - 1 (K2 to T3) See Frequency Chart Above *Consult factory for availability of non-standard output frequencies. **Output Frequency 1 must be less than Output Frequency 2. Input Frequency - B (B3 to R4) See Frequency Chart Above, for Only 1 input Frequency Place XX in this location. *If not listed enter SS in this block and then list the frequency after the part number. **Input A must be less than Input B *If not listed enter SS in this block and then list the frequency after the part number. **Input B must be greater than Input A *A special part number will be assigned for these cases. **Input A must be less than Input B. Output 1 must be less than Output 2. Not all frequency combinations are possible. Please consult factory. Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * Web: www.vectron.com 91 |
Price & Availability of FX-200-DFF
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |